Age-Dependence of Femoral Strength in White Women and Men

Although age-related variations in areal bone mineral density (aBMD) and the prevalence of osteoporosis have been well characterized, there is a paucity of data on femoral strength in the population. Addressing this issue, we used finite-element analysis of quantitative computed tomographic scans to assess femoral strength in an age-stratified cohort of 362 women and 317 men, aged 21 to 89 years, randomly sampled from the population of Rochester, MN, and compared femoral strength with femoral neck aBMD. Percent reductions over adulthood were much greater for femoral strength (55% in women, 39% in men) than for femoral neck aBMD (26% in women, 21% in men), an effect that was accentuated in women. Notable declines in strength started in the mid-40s for women and one decade later for men. At advanced age, most of the strength deficit for women compared with men was a result of this decade-earlier onset of strength loss for women, this factor being more important than sex-related differences in peak bone strength and annual rates of bone loss. For both sexes, the prevalence of “low femoral strength” (<3000 N) was much higher than the prevalence of osteoporosis (femoral neck aBMD T-score of −2.5 or less). We conclude that age-related declines in femoral strength are much greater than suggested by age-related declines in femoral neck aBMD. Further, far more of the elderly may be at high risk of hip fracture because of low femoral strength than previously assumed based on the traditional classification of osteoporosis. © 2010 American Society for Bone and Mineral Research

Femoral and vertebral strength improvements in postmenopausal women with osteoporosis treated with denosumab

In the randomized, placebo-controlled FREEDOM study of women aged 60 to 90 years with postmenopausal osteoporosis, treatment with denosumab once every 6 months for 36 months significantly reduced hip and new vertebral fracture risk by 40% and 68%, respectively. To gain further insight into this efficacy, we performed a nonlinear finite element analysis (FEA) of hip and spine quantitative computed tomography (QCT) scans to estimate hip and spine strength in a subset of FREEDOM subjects (n=48 placebo; n=51 denosumab) at baseline, 12, 24, and 36 months. We found that, compared with baseline, the finite element estimates of hip strength increased from 12 months (5.3%; p<0.0001) and through 36 months (8.6%; p<0.0001) in the denosumab group. For the placebo group, hip strength did not change at 12 months and decreased at 36 months (-5.6%; p<0.0001). Similar changes were observed at the spine: strength increased by 18.2% at 36 months for the denosumab group (p<0.0001) and decreased by -4.2% for the placebo group (p=0.002). At 36 months, hip and spine strength increased for the denosumab group compared with the placebo group by 14.3% (p<0.0001) and 22.4% (p<0.0001), respectively. Further analysis of the finite element models indicated that strength associated with the trabecular bone was lost at the hip and spine in the placebo group, whereas strength associated with both the trabecular and cortical bone improved in the denosumab group. In conclusion, treatment with denosumab increased hip and spine strength as estimated by FEA of QCT scans compared with both baseline and placebo owing to positive treatment effects in both the trabecular and cortical bone compartments. These findings provide insight into the mechanism by which denosumab reduces fracture risk for postmenopausal women with osteoporosis

Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone

<p>Abstract</p> <p>Background</p> <p>Polyurethane (PU) foam is widely used as a model for cancellous bone. The higher density foams are used as standard biomechanical test materials, but none of the low density PU foams are universally accepted as models for osteoporotic (OP) bone. The aim of this study was to determine whether low density PU foam might be suitable for mimicking human OP cancellous bone.</p> <p>Methods</p> <p>Quasi-static compression tests were performed on PU foam cylinders of different lengths (3.9 and 7.7 mm) and of different densities (0.09, 0.16 and 0.32 g.cm^-3), to determine the Young's modulus, yield strength and energy absorbed to yield.</p> <p>Results</p> <p>Young's modulus values were 0.08–0.93 MPa for the 0.09 g.cm^-3foam and from 15.1–151.4 MPa for the 0.16 and 0.32 g.cm^-3foam. Yield strength values were 0.01–0.07 MPa for the 0.09 g.cm^-3foam and from 0.9–4.5 MPa for the 0.16 and 0.32 g.cm^-3foam. The energy absorbed to yield was found to be negligible for all foam cylinders.</p> <p>Conclusion</p> <p>Based on these results, it is concluded that 0.16 g.cm^-3PU foam may prove to be suitable as an OP cancellous bone model when fracture stress, but not energy dissipation, is of concern.</p

Finite Element Analysis of Bone and Experimental Validation

This chapter describes the application of the finite element (FE) method to bone tissues. The aspects that differ the most between bone and other materials’ FE analysis are the type of elements used, constitutive models, and experimental validation. These aspects are looked at from a historical evolution stand point. Several types of elements can be used to simulate similar bone structures and within the same analysis many types of elements may be needed to realistically simulate an anatomical part. Special attention is made to constitutive models, including the use of density-elasticity relationships made possible through CT-scanned images. Other more complex models are also described that include viscoelasticity and anisotropy. The importance of experimental validation is discussed, describing several methods used by different authors in this challenging field. The use of cadaveric human bones is not always possible or desirable and other options are described, as the use of animal or artificial bones. Strain and strain rate measuring methods are also discussed, such as rosette strain gauges and optical devices.publishe

Phantomless calibration of CT scans for measurement of BMD and bone strength—Inter-operator reanalysis precision

Patient-specific phantomless calibration of computed tomography (CT) scans has the potential to simplify and expand the use of pre-existing clinical CT for quantitative bone densitometry and bone strength analysis for diagnostic and monitoring purposes. In this study, we quantified the inter-operator reanalysis precision errors for a novel implementation of patient-specific phantomless calibration, using air and either aortic blood or hip adipose tissue as internal calibrating reference materials, and sought to confirm the equivalence between phantomless and (traditional) phantom-based measurements. CT scans of the spine and hip for 25 women and 15 men (mean±SD age of 67±9years, range 41-86years), one scan per anatomic site per patient, were analyzed independently by two analysts using the VirtuOst software (O.N. Diagnostics, Berkeley, CA). The scans were acquired at 120kVp, with a slice thickness/increment of 3mm or less, on nine different CT scanner models across 24 different scanners. The main parameters assessed were areal bone mineral density (BMD) at the hip (total hip and femoral neck), trabecular volumetric BMD at the spine, and vertebral and femoral strength by finite element analysis; other volumetric BMD measures were also assessed. We found that the reanalysis precision errors for all phantomless measurements were ≤0.5%, which was as good as for phantom calibration. Regression analysis indicated equivalence of the phantom- versus phantomless-calibrated measurements (slope not different than unity, R2≥0.98). Of the main parameters assessed, non-significant paired mean differences (n=40) between the two measurements ranged from 0.6% for hip areal BMD to 1.1% for mid-vertebral trabecular BMD. These results indicate that phantom-equivalent measurements of both BMD and finite element-derived bone strength can be reliably obtained from CT scans using patient-specific phantomless calibration

Mechanical contributions of the cortical and trabecular compartments contribute to differences in age-related changes in vertebral body strength in men and women assessed by QCT-based finite element analysis.

The biomechanical mechanisms underlying sex-specific differences in age-related vertebral fracture rates are ill defined. To gain insight into this issue, we used finite element analysis of clinical computed tomography (CT) scans of the vertebral bodies of L3 and T10 of young and old men and women to assess age- and sex-related differences in the strength of the whole vertebra, the trabecular compartment, and the peripheral compartment (the outer 2 mm of vertebral bone, including the thin cortical shell). We sought to determine whether structural and geometric changes with age differ in men and women, making women more susceptible to vertebral fractures. As expected, we found that vertebral strength decreased with age 2-fold more in women than in men. The strength of the trabecular compartment declined significantly with age for both sexes, whereas the strength of the peripheral compartment decreased with age in women but was largely maintained in men. The proportion of mechanical strength attributable to the peripheral compartment increased with age in both sexes and at both vertebral levels. Taken together, these results indicate that men and women lose vertebral bone differently with age, particularly in the peripheral (cortical) compartment. This differential bone loss explains, in part, a greater decline in bone strength in women and may contribute to the higher incidence of vertebral fractures among women than men

Comprehensive Assessment of Osteoporosis and Bone Fragility with CT Colonography

PURPOSE: To evaluate the ability of additional analysis of computed tomographic (CT) colonography images to provide a comprehensive osteoporosis assessment. MATERIALS AND METHODS: This Health Insurance Portability and Accountability Act–compliant study was approved by our institutional review board with a waiver of informed consent. Diagnosis of osteoporosis and assessment of fracture risk were compared between biomechanical CT analysis and dual-energy x-ray absorptiometry (DXA) in 136 women (age range, 43–92 years), each of whom underwent CT colonography and DXA within a 6-month period (between January 2008 and April 2010). Blinded to the DXA data, biomechanical CT analysis was retrospectively applied to CT images by using phantomless calibration and finite element analysis to measure bone mineral density and bone strength at the hip and spine. Regression, Bland-Altman, and reclassification analyses and paired t tests were used to compare results. RESULTS: For bone mineral density T scores at the femoral neck, biomechanical CT analysis was highly correlated (R(2) = 0.84) with DXA, did not differ from DXA (P = .15, paired t test), and was able to identify osteoporosis (as defined by DXA), with 100% sensitivity in eight of eight patients (95% confidence interval [CI]: 67.6%, 100%) and 98.4% specificity in 126 of 128 patients (95% CI: 94.5%, 99.6%). Considering both the hip and spine, the classification of patients at high risk for fracture by biomechanical CT analysis—those with osteoporosis or “fragile bone strength”—agreed well against classifications for clinical osteoporosis by DXA (T score ≤−2.5 at the hip or spine), with 82.8% sensitivity in 24 of 29 patients (95% CI: 65.4%, 92.4%) and 85.7% specificity in 66 of 77 patients (95% CI: 76.2%, 91.8%). CONCLUSION: Retrospective biomechanical CT analysis of CT colonography for colorectal cancer screening provides a comprehensive osteoporosis assessment without requiring changes in imaging protocols. (©) RSNA, 2015 Online supplemental material is available for this article. An earlier incorrect version of this article appeared online. This article was corrected on July 24, 2015

Femoral strength in osteoporotic women treated with teriparatide or alendronate

To gain insight into the clinical effect of teriparatide and alendronate on the hip, we performed non-linear finite element analysis of quantitative computed tomography (QCT) scans from 48 women who had participated in a randomized, double-blind clinical trial comparing the effects of 18-month treatment of teriparatide 20 μg/d or alendronate 10 mg/d. The QCT scans, obtained at baseline, 6, and 18 months, were analyzed for volumetric bone mineral density (BMD) of trabecular bone, the peripheral bone (defined as all the cortical bone plus any endosteal trabecular bone within 3 mm of the periosteal surface), and the integral bone (both trabecular and peripheral), and for overall femoral strength in response to a simulated sideways fall. At 18 months, we found in the women treated with teriparatide that trabecular volumetric BMD increased versus baseline (+ 4.6%, p < 0.001), peripheral volumetric BMD decreased (− 1.1%, p < 0.05), integral volumetric BMD (+ 1.0%, p = 0.38) and femoral strength (+ 5.4%, p = 0.06) did not change significantly, but the ratio of strength to integral volumetric BMD ratio increased (+ 4.0%, p = 0.04). An increase in the ratio of strength to integral volumetric BMD indicates that overall femoral strength, compared to baseline, increased more than did integral density. For the women treated with alendronate, there were small ( < 1.0%) but non-significant changes compared to baseline in all these parameters. The only significant between-treatment difference was in the change in trabecular volumetric BMD (p < 0.005); related, we also found that, for a given change in peripheral volumetric BMD, femoral strength increased more for teriparatide than for alendronate (p = 0.02). We conclude that, despite different compartmental volumetric BMD responses for these two treatments, we could not detect any overall difference in change in femoral strength between the two treatments, although femoral strength increased more than integral volumetric BMD after treatment with teriparatide